Need help?Do you have a question about the Konftel DECT and is the answer not in the manual?
Connect the base station to a telephone jack and the mains using the power adapter.
Mount the base station securely on the wall using the provided screws.
Put the base station into registration mode by holding the key/LED for at least 3 seconds.
Enter the base station security code (PIN code 0000) into the handset during registration.
General| Technology | DECT |
|---|---|
| GAP compatible | Yes |
| Display | LCD |
| Conference capability | Yes |
| Supported networks | DECT |
| Speakerphone | Yes |
| Headset compatibility | Yes |
| Range | Up to 300 m (open area) |
| Wireless range | Up to 300 m (open area) |
| Frequency range | 1880-1900 MHz |
| Battery life | Up to 20 h (talk time) |
To Next Page