Need help?Do you have a question about the Kong Indiana and is the answer not in the manual?
General| Brand | Kong |
|---|---|
| Model | Indiana |
| Category | Safety Equipment |
| Language | English |
Users must understand product information, including characteristics, services, and assembly, and acknowledge high-risk activities.
Perform all controls before and after use, ensuring the product is in perfect condition and suited for the intended use.
Replace product immediately if doubts arise; falls or improper use can reduce strength and service life.
Combine with compatible PPE, assess anchor position, clearance, fall height, and anchor point resistance.
Assess risks, prepare rescue plans, minimize fall heights, and ensure fall arrest systems conform to EN 363.
Wash with lukewarm water and detergent, rinse, and dry naturally. Disinfect by soaking in lukewarm water.
Lubricate metallic parts with silicone oil. Store equipment in a dry, neutral, and safe place away from heat and UV.
Perform periodic inspections by qualified persons. Metallic devices have unlimited life; textile/plastic have 10 years.
Adhere to national laws for PPE use. Manufacturer guarantees conformity against production defects for up to 3 years.
INDIANA and IRE are sit harnesses certified to EN 12277/C:07 and UIAA 105 for mountaineering and sport climbing.
Check size and wear harness correctly. Perform suspension tests to ensure proper fit and adjustment before use.
Tie onto the attachment point with a figure of eight knot. Tying on with one connector is forbidden.
Check textile parts for damage, stitchings for integrity, and buckles for proper function and absence of cracks.
This device has been certified by the notified body no. 0123 - TÜV SÜD Product Service GmbH.
To Next Page
