Need help?Do you have a question about the Kongsberg AIS 200 and is the answer not in the manual?
General| Channel Bandwidth | 25 kHz |
|---|---|
| Number of AIS Transmitters | 1 |
| Number of AIS Receivers | 2 |
| Modulation | GMSK |
| Data Rate | 9600 bps |
| Operating Temperature | -25°C to +55°C |
| Frequency | 161.975 MHz, 162.025 MHz |
| Frequency Range | 156.025 MHz - 162.025 MHz |
| Output Power | 12.5 W (typical) |
| Power Supply | 24 V DC |
| Standards | ITU-R M.1371 |
Provides information on operating the AIS 200 Automatic Identification System.
Lists external documents relevant to the manual.
Lists definitions, abbreviations, and acronyms used in the manual.
Overview of the AIS 200 system, its components, and general functionality.
Details the categories of information exchanged by the AIS system.
Lists and describes the physical units comprising the AIS 200 system.
Describes the display, keypad, and LED indicators of the AIS 200.
Explains the function and operation of various buttons for system interaction.
Guides on editing parameters and accessing help information.
Details the menu hierarchy and navigation within the system.
Describes the default page showing information about nearby vessels.
Explains how to access and navigate the Main menu options.
Covers modes for new alarms/LR received and lists of alarms/LR.
Details how to access and edit system parameters via settings.
Explains SMS functions like Inbox, Outbox, and message writing.
Explains submenus for displaying, testing, and debugging communication links.
Describes the PIN code system for protecting variables.
Details the components and functions of the optional MKD unit.
Overview of the software setup process for the AIS 200.
Details the security PIN code system and access levels for settings.
Guides on inputting static ship data that does not change.
Explains network configuration settings for LAN connection.
Covers configuring radio channels and managing regions.
Guides on manually adding and editing radio regions and their parameters.
Overview of AIS 200 operation and voyage-related data input.
Instructions on powering the AIS 200 system on, off, and restarting.
How to adjust display brightness, contrast, and LED settings.
Procedures for updating navigational status and voyage data.
Explains the SMS function for sending text messages to other vessels.
Details how alarms are indicated and managed by the system.
Information on the long-range interface and inquiries.
Adjusting brightness and contrast settings on the MKD.
Procedures for setting status and entering voyage data via MKD.
Details SMS functions and alarm handling on the optional MKD.
Procedure for restarting the AIS 200 using the optional MKD.
Setting up security codes and access levels for the optional MKD.
Inputting static vessel data using the optional MKD.
Configuring network settings and serial ports via MKD.
Managing radio channels and regions via the MKD.
Instructions for setup file and dynamic data mode for Inland Waterway.
Details viewing or updating Inland Waterway data.
Explains Inland Waterway Area, Static, and Voyage data.
To Next Page
