EasyManua.ls Logo

Kongsberg KAntrak 1700 - User Manual

Kongsberg KAntrak 1700
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GEM APPLICATION USER’S GUIDE
KAntrak™ 1700

Other manuals for Kongsberg KAntrak 1700

Questions and Answers

  • A
    Amanda ScottAug 1, 2025
    What to do if my Kongsberg Monitor unit does not power up?
    • A
      Alicia KleinAug 1, 2025
      If your Kongsberg Monitor unit isn't powering up, first, check to make sure all the connections to the unit are correctly and securely connected. Second, verify that the power source is active and providing power to the unit.
  • W
    William FloresAug 18, 2025
    Why does my Kongsberg Monitor unit fail to display any data?
    • J
      Jenna GilbertAug 18, 2025
      If your Kongsberg Monitor unit isn't displaying any data, begin by checking that all connections to the unit are correctly established. Then, ensure that the data source is actively broadcasting data to the unit.

Summary

Menu Browsing

Display Modes

Single Screen

Monitors one parameter at a time, showing icon, description, units, and bar graph.

Dual Screen

Monitors two parameters simultaneously, displaying their icons and units.

Multi Screen

Monitors a user-selected list of four parameters with icons and units.

DTC Screen

Displays Data Trouble Codes (DTC) according to SAE J1939-73, including fault status.

Settings Menu

Display Mode

Allows selection of the current display mode: Single, Dual, Multi, or Dtc.

Language

Enables selection of various supported languages for the user interface.

Fuel Level Source

Configures how the fuel level signal is read, either from discrete input or network.

Alarm Output

Controls the activation of an external alarm device upon new active faults.

Demo Mode

Enables unit testing without vehicle connection using simulated data.

Tier4 Popout Mode

Enables pop-up monitoring for SCR parameters with status changes.

Contrast;Backlight

Adjusts screen contrast and backlight settings according to user preferences.

Units

Allows selection of preferred units for distance, pressure, and volume.

Faults Clear

Initiates a request to clear all occurred faults (DM2) from vehicle modules.

Fuel Tank Calibration

Guides the user through calibrating the fuel sender response for custom tanks.

Factory settings

Resets the unit to its original factory settings, losing all current configurations.

Supported Parameters

Tier 4 specific display

Explains the presentation of SCR regeneration status in three columns and pop-up labels.

Kongsberg KAntrak 1700 Specifications

General IconGeneral
Native Resolution1280 x 1024
Input SignalVGA, DVI
Screen Size17 inches
TechnologyLCD
Operating Temperature0°C to 50°C
Storage Temperature-20°C to 60°C
MountingVESA 100x100 mm

Related product manuals