Koni 30 Series User Manual

Koni%Adjustment%Guide%
Adjustment*Procedure*30*Series*
Adjustment must be made with the damper removed from the vehicle or at a minimum with the shaft end
of the damper disconnect from the mount.
Do not clamp here!
Figure 1: Only hold by attachment on body, lower dust cover.
Figure 2: The handy adjustment button. Depress the button while turning clockwise to give increased
damping forces.
Rebound%adjustable,%the%adjustment%is%made%with%the%shock%fully%extended.%

Koni 30 Series Specifications

General

Brand	Koni
Model	30 Series
Category	Automobile Parts
Language	English

Summary

Koni 30 Series Adjustment Procedure

Adjustment Preparation and Handling

Instructions for damper removal, shaft disconnection, and proper holding points during adjustment procedures.

Step-by-step Adjustment Process

Detailed instructions for removing dust cover, operating the adjustment button, and turning the piston rod for rebound adjustment.

Adjustment Direction and Levels

Explanation of how clockwise and counter-clockwise adjustments affect firmness and the impact of multiple clicks.