E-12016. 4 Printed in China
//
INSTALLATION MANUAL
A79J-9601-00
Applied Machines: / /
<Important>
Be sure to correctly follow the procedures in order as explained in this Installation Manual.
If you do not follow the procedure in order, the image trouble may occur.
1. Outline of installation procedures
When installing the main body and associated options as a system, follow the order shown on the upper.
Caution:
• Lifting the main body in an awkward position or transporting it in a poorly balanced position could result in
personal injury. When transporting the main body, assign an adequate number of persons to the job and
ensure that each person can take a good position of not being excessively loaded.
(mass: approx. 110 kg (242-1/2 lb))
Note:
• For the detailed installation procedures for each option, follow the instructions given in the corresponding
installation manual and perform the procedures correctly.
• When placing the main body on the floor, make sure to use the paper feed cabinet or the desk to secure
the performance and the quality of the product.
• Once the Power Switch is turned ON, do not turn OFF it until the installation work has been completed.
Machine
Electronic system options
AU-102
AU-201S
PC-215 PC-415 DK-510 DK-705PC-115
FK-514
FK-515*
2
UK-212*
1
SC-508*
1
KP-101
WT-506
MK-735
HD-524*
1
HT-509
TK-101
KH-102
EK-608*
1
EK-609*
1
MK-730
MK-742*
2
MK-734
CU-102
LU-302
LU-207
VI-510IC-416
SP-501
UK-501
OT-506
RU-513
PK-520
FS-537FS-536 FS-537SDFS-536SD
JS-602PI-507
PK-523
ZU-609
PK-519*
3
FS-533*
3
JS-506*
3
Electronic system options
To Next Page
Need help?
General
