Why is my KONICS KRN1000 SD/USB memory not recognized?
The KONICS Tablet might not recognize the SD/USB memory because the file system is not supported. The device supports only FAT16 and FAT32. Format the memory as FAT16 or FAT32. Also, if the USB memory has multiple partitions, the tablet will recognize only the first one.
What to do if the screen touch position is not correct on my KONICS KRN1000?
If the screen touch position on your KONICS Tablet is not correct, recalibrate the touch function. If the touch calibration is wrong, reset the setting and recalibrate the touch.
How to fix sensor input value that is not right on my KONICS KRN1000?
If the sensor input value is not right on your KONICS Tablet, check the sensor input settings to ensure they are correct in the input type setting.
What to do if communication connection via RS422/485 communication does not execute on KONICS KRN1000 Tablet?
If the communication connection via RS422/485 does not execute on your KONICS Tablet, check the signal polarity connection of the RX+, RX-, TX+, TX- communication line. Reset it.
What to do if communication connection via ethernet communication does not execute on KONICS KRN1000 Tablet?
If the communication connection via ethernet communication does not execute on your KONICS Tablet, check the communication line connection and reset it.
How to fix current measurement that is not correct on KONICS KRN1000 Tablet?
If the current measurement is not correct on your KONICS Tablet, connect the shunt resistance. Measure the shunt resistance connection method.
Why is the displayed date and time not correct on my KONICS KRN1000 Tablet?
The date and time on your KONICS Tablet may not be correct due to the device having a date and time error within ±2min/year. Set the date and time again.
What to do if my KONICS Tablet KRN1000 does not change normal operation screen after booting?
The internal memory of your KONICS Tablet KRN1000 may have an error. Contact KONICS service center or seller.
How to fix KONICS Tablet KRN1000 that does not display anything on LCD screen when power ON?
Check the power supply and ensure the power connector is connected normally.
To Next Page
General