How to fix Konifera BW13000 Accessories awning fabric rolling up unevenly?
To address uneven rolling of the Konifera Accessories awning fabric, check if the fabric tilt is set correctly and adjust the fabric inclination. Also, make sure that the hinged arms are correctly aligned and align them if necessary.
What to do if Konifera BW13000 Accessories awning does not close correctly on one side?
If your Konifera Accessories awning doesn't close correctly on one side, shim the roll shaft on the affected side with fabric to increase its volume and then adjust the articulated arms.
Identifies the product type covered by the manual.
Specifies the product's designated purpose and restrictions.
Defines symbols and terminology used in the manual.
Recommends safety gear for installation and operation.
Provides general safety guidelines for product use and installation.
Details required qualifications for installation personnel.
Explains how to operate the awning manually, e.g., during power failure.
Describes the procedure for safely lifting the awning using ropes.
Covers checks and considerations before installing mounting brackets.
Outlines safety precautions and requirements for securing the awning.
Addresses risks and measures for working at heights.
Warns about potential hazards during manual operation if not managed correctly.
Advises on initial testing and inspection after extending the awning.
Provides guidelines for using the awning during rainy conditions.
Specifies conditions and limits for using the awning in windy weather.
Warns against extending the awning during snow or frost conditions.
Instructs on removing debris from the awning to prevent damage.
Highlights safety concerns regarding obstructions in the awning's operational area.
Details regular checks and upkeep required for safe and optimal awning function.
Lists all items included in the awning's delivery package.
Guides the user on verifying the completeness and condition of received items.
Explains properties and potential aesthetic variations in awning fabric.
Provides instructions and warnings for safely unpacking the product.
Lists the tools required for the assembly process.
Covers initial steps and considerations before commencing installation.
Details how to determine the correct mounting height and clearance.
Specifies the correct spacing for mounting brackets based on awning width.
Provides step-by-step instructions for physically mounting the awning.
Explains how to set and adjust the awning fabric's inclination angle for drainage.
Guides on how to properly align the articulated arms for smooth operation.
Details the procedure for safely dismantling and removing the awning.
Advises on preliminary checks and safety considerations before operating the awning.
Identifies and labels the various parts of the awning assembly.
Explains the process of extending and retracting the awning using the hand crank.
Provides important notes on the correct use and winding of the awning fabric via the gearbox.
Outlines routine cleaning, checks, and care for the awning's fabric and structure.
Provides guidance on storing the awning for long-term periods.
Details the process and packaging requirements for returning the product.
Lists technical details such as dimensions, weight, fabric type, and wind resistance class.
Instructs on the correct and environmentally friendly disposal of the product.
Describes the recyclable materials used for product packaging.
Directs users on how to seek advice, place orders, or report issues.
Provides contact information for technical service and customer advice centers.
General| Brand | Konifera |
|---|---|
| Model | BW13000 |
| Category | Accessories |
| Language | English |
To Next Page