TECHNICAL DATA
CHECK, MAINTENANCE, CLEANING
- Routinely ensure that the components are
- secure.
- Clean with a damp cloth and a non-abrasive
- cleaning agent.
4. DIMENSIONS
4.1 Width: 60 mm
4.2 Depth: 90 mm
4.3 Height: 95 mm
4.4 Bracket: 70 mm deep, 24 mm high
FAULT-FINDING (F) and REPAIR (R)
F: The Headphone Holder a is not stable
F: R: Ensure that the Wall Plate b
F: R: is mounted securely
F: R: Push Headphone Holder a down
F: R: as far as it will go 3.2
Material
Wall plate and
headphone holder: PA + GF
Load Headphones
Dimensions
W x D x H 60 x 90 x 95 mm
Support: T x H 70 x 25 mm
Packaging Box: 124 x 97 x 76 mm
Weight net: 0.1 kg, gross: 0.2 kg
SETUP /
OPERATION INSTRUCTIONS
3. INSTALLATION of the
3. HEADPHONE HOLDER
3.1 Place the Headphone Bracket a from top
3.1 to bottom as far as it will go over the
3.1 plate b that has already been installed.
3.2 The Headphone Holder is in place once
3.2 the bracket a and the plate b are flush.
SPECIAL FUNCTIONALITY
3.3 If needed, e.g. in tight spaces, the
3.3 headphone holder can be easily and
3.3 quickly removed without the use of tools.
3.3 It can also be re-installed just as quickly.
To Previous Page
Loading...
Need help?
General
