Konig Security SEC-APR10

To Next Page

SEC-APR10

MOTION ALARM

With Remote Control

Description:

1. PIR Sensor

2. Siren

3. IR sensor

4. Battery LED Indicator

5. External Siren Socket

6. Battery compartment

7. Arm button

8. LED indicator

9. Disarm button

10. Battery compartment

11. Program switches

12. Battery cover

Battery installation:

1. The battery compartment is accessed from the rear of the alarm

by removing the screw from the bottom and lifting the back cover

2. Insert 4x AA size batteries (not included) according the correct

polarity.

3. When the last battery is inserted the alarm will beep very loud to

indicate that the batteries are installed properly. Replace the back

cover.

ENGLISH

INSTRUCTIONS

Need help?

Do you have a question about the Konig Security SEC-APR10 and is the answer not in the manual?

Summary

Battery Installation

Battery Compartment Access

Access the battery compartment by removing the rear screw and lifting the back cover.

Battery Insertion

Insert 4x AA batteries according to the correct polarity.

Confirmation Beep

A loud beep confirms correct battery installation; replace the back cover.

Wall Mounting

Back Plate Mounting

Mount the back plate to the wall in the desired position.

Unit Attachment

Clip the alarm unit onto the mounted back plate.

Securing the Unit

Fasten the alarm to the back plate using the screw on the bottom.

Remote Control Operation

Remote Control Batteries

Remote uses 3x LR44 batteries; check LED for replacement needs.

Alarm Programming

Program the alarm with the remote control by setting switches and pressing buttons.

Arming the Alarm

Press 'ARM' to arm; a confirmation tone and 30-second exit delay indicate readiness.

Disarming the Alarm

Press 'DISARM' to disarm; a beep indicates motion, with a 4-second delay.

Safety and General Information

LED Indicator Remark

A constantly on LED indicator signifies that batteries need replacement.

Electrical Shock Warning

Service by authorized technicians only; do not expose to water or moisture.

Warranty Disclaimer

No liability for modifications or incorrect product use.

General Specifications Note

Designs and specifications are subject to change without prior notice.