Konig CMP-BARSCAN21 - Group 9-2: Industrial 2 OF 5; IATA; Enable;Disable Industrial 2 of 5;IATA; Industrial 2 of 5;IATA check character control

21
USER DEFINE LENGTH SETTING
User define (3 sets available)
Min: 4
Max: 48
1.) Scan the Enter group 9-1 label.
2.) Scan the User Define label.
3.) Scan the Six Digit labels in the Table-Hex (only 3 sets of lengths can be defined).
4.) Scan the Confirm label in the Table-Hex.
5.) Scan the Exit label.
Group 9-2: Industrial 2 OF 5 / IATA
Enter group Exit
ENABLE DISABLE (*)
TRANSMIT CHECK CHARACTER
ENABLE (*) DISABLE
VERIFY CHECKSUM
ENABLE DISABLE (*)