To Next PageTo Next Page
Need help?Do you have a question about the Konig CMP-BARSCAN21 and is the answer not in the manual?
General| Connectivity | USB |
|---|---|
| Scanning Capability | 1D Barcodes |
| Scanning Technology | Laser |
| Scan Rate | 100 scans per second |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Weight | 150 g |
| Type | Handheld |
| Resolution | 0.10 mm (4 mils) |
| Operating System Compatibility | Windows, Linux, Mac |
| Drop Specification | 1.5 m drop to concrete |
| Humidity | 5% to 95% (non-condensing) |
Describes the general steps for configuring the scanner.
Demonstrates setting the operating mode to "Continuous mode".
Shows how to assign preamble and postamble strings.
Selects the keyboard interface for the scanner.
Selects the RS-232 interface for the scanner.
Selects PC/AT or PS/2 for keyboard interface.
Sets the keyboard language to US English.
Sets keyboard language for England, France, Germany, Italy, Belgium.
Sets keyboard language for Sweden/Finland, Denmark, Norway.
Sets keyboard language for Spanish, Portugal, Switzerland.
Sets the keyboard language to Canadian.
Sets the keyboard language to Dutch.
Sets the keyboard language to Polish.
Sets the keyboard language to Japanese.
Settings for trigger-activated scanning modes.
Settings for continuous scanning modes.
Configures preamble and postamble strings.
Clears configured preamble and postamble strings.
Sets the baud rate for RS-232 communication.
Sets the data bit configuration for RS-232.
Sets the parity for RS-232 communication.
Sets the handshaking method for RS-232.
Configures ACK/NAK response and CTS observation times.
Configuration options for Code 39 symbology.
Configuration options for Code 32 symbology.
Controls check character transmission and verification.
Enables or disables Interleaved 2 of 5 symbology.
Controls check character transmission and verification.
Configures minimum and maximum barcode length.
Enables or disables Industrial 2 of 5/IATA symbology.
Controls check character transmission and verification.
Configures minimum and maximum barcode length.
Configuration options for IATA symbology.
Enables or disables Matrix 2 of 5 symbology.
Configures minimum and maximum barcode length.
Configures minimum and maximum barcode length.
