2
FEATURES
• Reading : 4mil (0.1mm)
• Sensor: LED
• Interface: USB
• Readable barcodes: Code 39, Full ASCII Code 39.
UPC/EAN/JAN, CODABAR,
Interleaved 2/5,
Code 128, Code 11,Code 93,
MSI/PLESSEY,
Code 4
PACKAGING CONTENTS
- USB Handheld Barcode Scanner
- User manual
Barcode Scanner Setup Procedures
1) Locate a group that contains the parameters to be changed.
2) Scan the “Enter Group #” label. The scanner will beep to indicate that setup
is in progress.
3) Scan the label representing the parameter to be changed.
4) Scan the “Exit” label to exit the group currently selected. The scanner will
beep.
5) Repeat the procedure for other groups including the parameters to be
changed.
Example 1:
Set the operating mode to “Continuous mode”
1) Scan “Enter Group 5”
2) Scan “Continuous/Trigger off”
3) Scan “Exit”
To Next Page
Loading...
