2
ENGLISH
Introduction:
This König cable tester reads the correct pin confi guration of the different LAN cables, by
comparing the transmitting end to the corresponding receiving end. With the remote unit
it’s easy to test existing cables and connections. Ideal to test wires which are behind walls
or ceilings. It is easy to verify the cable continuity, open, short and cross-connect.
Features:
• Can test the correct pin confi guration of 10Base-T, 10Base-2 Ethernet cable, RJ45/
RJ11 modular cables, 258A, TIA-568A/568B and Token Ring cable etc.
• Easy to read cable status and verify cable continuity, open, short and miss wiring.
• With the remote unit it’s easy to test existing cables and connections which are behind
walls or ceilings.
• Can test with grounding.
• Auto or manual scan.
Specifi cations:
• Transmitter
Connections: 2x RJ45
Indication: LED
Switch: On/Off
Switch: Auto/Manual
Switch: Test
• Remote unit
Connections: RJ45
Indication: LED
• Power: 9 V Block (not included)
• Housing: Plastic
Connections:
To Next Page
Loading...