Need help?Do you have a question about the Konig KN-DJMIXER10 and is the answer not in the manual?
Controls the power state of the mixer. LED indicates power is ON.
Displays the left and right channel output levels.
Allows selection between stereo and mono overall output signal.
Adjusts the input level for each individual channel.
Mixes signals between channel A and channel B.
Controls the volume level for the headphone output.
Reduces music volume when microphone signal is present.
Adjusts the volume level of the DJ microphone.
Details the impedance and sensitivity for DJ Mic, Phono, and Line/CD inputs.
Details the output levels for Master and Headphone connections.
Covers frequency response, distortion, S/N ratio, and power source.
Controls the power state of the mixer. LED indicates power is ON.
Displays the left and right channel output levels.
Allows selection between stereo and mono overall output signal.
Adjusts the input level for each individual channel.
Mixes signals between channel A and channel B.
Controls the volume level for the headphone output.
Reduces music volume when microphone signal is present.
Adjusts the volume level of the DJ microphone.
Details the impedance and sensitivity for DJ Mic, Phono, and Line/CD inputs.
Details the output levels for Master and Headphone connections.
Covers frequency response, distortion, S/N ratio, and power source.
General| Brand | Konig |
|---|---|
| Model | KN-DJMIXER10 |
| Category | Music Mixer |
| Language | English |
To Next Page
