Do you have a question about the Kontron 3.5"-SBC-VR1000 and is the answer not in the manual?
Essential safety guidelines for operating and handling the Kontron product.
Precautions for high voltage situations and proper handling/unpacking procedures.
Step-by-step guide for installing the board, including ESD precautions and mounting.
Ensuring product compliance with IEC60950-1 safety standards for chassis installation.
Visual representation of the 3.5"-SBC-VR1000's components and their interconnections.
Summarizes the key features and specifications of the 3.5"-SBC-VR1000 board.
Diagram and list of jumpers located on the top side of the board.
Diagram and list of connectors on the rear side of the board.
Diagram and list of connectors on the external I/O panel side.
Details the pin assignment and specifications for the HDMI 2.0 connector.
Details the pin assignment and specifications for the DisplayPort connector.
Describes the pin assignment and LED status for the two Gigabit Ethernet connectors.
Explains the pin assignments for USB 3.1 and USB 2.0 connectors on the I/O panel.
Information on the DC 12 V power input wafer and CR2032 battery input.
Pin assignments for front panel connectors like reset, LEDs, and power buttons.
Instructions for entering and navigating the UEFI BIOS setup program.
Overview of the BIOS setup utility menus and navigation.
Details sub-screens and functions for advanced BIOS configurations.
Configuration options for integrated graphics, display types, and backlight control.
Settings for CPU virtualization, NX mode, IOMMU, and active CPU cores.
Manages boot device priority, boot options, and CSM support settings.
Configuration of administrator and user passwords for system security.
| Serial Ports | 2x RS-232/422/485 |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Form Factor | 3.5-inch |
| Display Interface | LVDS |
| Storage | SATA |
| Ethernet | 2x Gigabit Ethernet |
| USB Ports | 4 x USB 2.0 |
| Audio | Line-out, Mic-in |
| Expansion | Mini PCIe |