Kontron SFM25 - Default Chapter; Table of Contents

18 Instruction manual SFM
TABLE OF CONTENTS
0. GENERAL INFORMATION
1. INSTALLATION
l . l Unpacking 2
1.2 Checking the Instrument ' s serial number 2
1.3 Checking the accessories 2
1.4 Checking the mains supply 3
1.5 Installation 4
1.5.1 Installation of the xenon lamp 6
1.5.2 Lamp adjustment 7
1.5.3 Removal of the xenon lamp 8
1.5.4 Fitting the sample compartment accessories 9
1.5.5 Adjustment of the HPLC flow cell 10
1.5.6 Printer, Recorder 11
2. INSTRUMENT DESCRIPTION
2.1 Specifications 2
2.2 Construction of the Instrument 4
2 . 3 Keyboard 6
2.4 Display 8
2.5 Parameter plan 9
2.5.1 Wavelength control (group 2) 11
2.5.2 Data control (group 3) 12
2.5.3 Printer/Plotter (group 4) 14
2.5.4 Interface control RS-232C (group 5) 16
3. OPERATION
3.1 Operating hints 2
3.2 Initialisation 2
3 . 3 Programming 3
3.3.1 General remarks 3
3.3.2 Wavelength programming 4
3.3.3 Calibration 5
3.3.4 Blank compensation 6
3.3.5 Calculation of average value 7
3.3.6 Emission scan 8
3.3.7 Exciation scan 10
3.3.8 Synchroscan 12
3.3.9 Parameter viewing 14
3.3.10 Printout of parameter 15
3.3.11 Automatic data Output Lambda-FIX 16
3.3.12 Automatic data Output Lambda-SCAN 17
3.4 Measurement examples 18
3.4.1 Fixed wavelength 18
3.4.2 Emission scan 21
3.4.3 Excitation scan 24
3.4.4 Synchroscan 27
3.5 Changing the spectral bandwidth 30
3.6 Switching off the Instrument 31
07.86 0 GENERAL INFORMATION - 2 -