To Next PageTo Next PageWhat does it mean when LED1 and LED2 are off on my KONTRONIK KOSMIK 200 HV?
When the KONTRONIK Controller provides info during use, LED1 and LED2 will turn off. For further information, check the error.dat file on the SD card.
General| Brand | KONTRONIK |
|---|---|
| Model | KOSMIK 200 HV |
| Category | Controller |
| Language | English |
Lists the items included in the KOSMIK ESC package, such as cables and connectors.
Setting up the transmitter's throttle curve for ESC programming procedures.
Procedure for selecting and programming the desired operating mode for the ESC.
Adjustable feature for gradual motor spool-up from 0% to 100% throttle.
Automatic deep-discharge protection adjustable based on battery cell count.
Details on ESC features like sensorless operation, mode programming, and protective functions.
Guidelines for effective cooling and proper physical installation of the ESC.
Information on the BEC system, its capacity, and voltage adjustment.
Explanation of the toroidal core's function for interference suppression.
Description of the circuit optimizing efficiency at part load and reducing heating.
Explanation of how the ESC can be operated in part load conditions.
How the ESC works without motor sensors using 3D recognition.
Details on the ESC's automatically adjusted clock frequency for optimal efficiency.
Overview of built-in protective functions like signal loss and over-temperature.
Specific operational mode for helicopters with active RPM control (governor).
Functionality for quick motor restart after interrupted or unsuccessful autorotation.
Connecting BEC digital servos with high performance and specification details.
Instructions for connecting motor cables and changing motor rotation direction.
Information on sensor plugs for connecting telemetry or Bluetooth modules.
Overview of programmable modes and their function ranges like brake and RPM control.
Procedure to program Mode 1 (APM) and reset previous settings.
Procedure to program Mode 2 (Glider) with adjustable brake.
Procedure to program Mode 3 (Motor Flight/Boat) without brake.
Procedure to program Mode 4 (Helicopter) with governor and autorotation.
Procedure to program Mode 6 (RC Car) with forward/reverse and brake.
Steps for performing online software updates for the KOSMIK ESC.
Interpreting LED signals to diagnose operating problems and errors.
Locating detailed error reasons documented on the SD card's log file.
