To Next PageTo Next Page
Need help?Do you have a question about the KONTRONIK JIVE Pro 80+ HV and is the answer not in the manual?
General| Voltage | 16 - 50 V |
|---|---|
| Maximum continuous current | 80 A |
| Battery eliminator circuit (BEC) burst current | 20 A |
| Battery eliminator circuit (BEC) output voltage | 5 V, 8 V |
| Battery eliminator circuit (BEC) continuous current | 8 A |
| Quantity per pack | 1 pc(s) |
| Compatible battery technologies | Lithium Polymer (LiPo) |
| Type | Radio-Controlled (RC) Model Parts |
| Proper use | Universal |
| Product type | Speed controller |
| Product color | Red |
| Brand compatibility | KONTRONIK |
Weight and Dimensions| Depth | 33 mm |
|---|---|
| Width | 62 mm |
| Height | 16.5 mm |
| Weight | 84 g |
Provides crucial safety advice for using the JIVE Pro ESC, including avoiding manned applications and ensuring proper cooling.
Details automatic protection to prevent battery deep discharge by slowing or shutting off motor based on voltage.
Details the Battery Eliminating Circuit capacity, voltage adjustment, and connection requirements for servos.
Details automatic functions like receiver signal loss shutdown, overheating, and low voltage protection.
Details the procedure to reset ESC to factory defaults and program Mode 1.
Details programming for Helicopter mode with governor, autorotation, and transmitter setup.
Lists LED blinking codes and their meaning for programming errors, guiding users on how to resolve them.
Details LED blinking codes indicating operational errors like voltage issues or overheating and recommended actions.
