6
4. Mounting of this motor
While fixing the motor on the front flange, the
permissible screwing depth has
Type
Screw
Pitch
circle
MINIPYRO 400-x M3 25 mm
PYRO 600-x M3 25 mm
PYRO 650-x M4 30 mm
PYRO 700-x M4 30 mm
Additionally, KONTRONIK strongly recom
mends the installation of a counter bearing
for extreme applications such as hard 3D
flight with PYRO 700 motors
prevent the motor from damage.
5. Maintenance
Brushless motors need no maintenance.
Disassembling may damage the motor
sufficient
to keep the motor clean from dirt and
water.
6. Warranty
KONTRONIK guarantees this product to be
from factory defects in material and workmanship
for a period of 24 months from date of purchase
and purchase within the EU.
purchases made outside the EU is in line with the
respective legal regulations.
not cover: sui
tability for specific application,
components worn by use, application of reverse or
improper voltage, tampering, misuse or shipping.
Our warranty liability shall be limited to repairing or
replacing the unit to our original specifications.
warranty claims determine with
deconstructing the KONTRONI
Because we have
no control over the installation or
use of these products, in no case shall our liability
exceed the original cost of the product. To accept
guarantee the original bill on which the product the
date of purchase and the dealer is named must be
sent togethe
r with the product. Also a detailed fault
description is necessary and should include: used
motor, propeller,
type of batteries, time of failure.
KONTRONIK repair form.
Do not forget to write your
package.
!
While fixing the motor on the front flange, the
Maximum
thread
reach
8 mm
8 mm
8 mm
8 mm
Additionally, KONTRONIK strongly recom
-
mends the installation of a counter bearing
for extreme applications such as hard 3D
in order to
prevent the motor from damage.
Brushless motors need no maintenance.
Disassembling may damage the motor
. It is
to keep the motor clean from dirt and
KONTRONIK guarantees this product to be
free
from factory defects in material and workmanship
for a period of 24 months from date of purchase
purchases made outside the EU is in line with the
tability for specific application,
components worn by use, application of reverse or
improper voltage, tampering, misuse or shipping.
Our warranty liability shall be limited to repairing or
replacing the unit to our original specifications.
All
opening or
product.
no control over the installation or
use of these products, in no case shall our liability
exceed the original cost of the product. To accept
guarantee the original bill on which the product the
date of purchase and the dealer is named must be
r with the product. Also a detailed fault
description is necessary and should include: used
count and
By the act of using this motor the user accepts all
resulting liability.
7.
Repairs can be obtained through your distributor or
if you are located in Europe, directly by
KONTRONIK.
Deliveries freight forward cannot be
accepted.
Please obey: To handle a replacement a valid
credit card number with security code is necessary.
In case of an irreparable damage the product will
be returned to you only on your request and at your
own cost.
Electric motors
may not been thrown out with
household rubbish. They should be
properly and environ
mentally safe after their
serv
ice life. The national and local refuse disposal
regulations must be observed.
7.
Service, Technical Support, Hotline
Hotline:
free when calling from Germany
Tel.:
Fax:
Email:
Web:
Latest KONTRONIK product information, FAQ,
and telephone reachability can be found up
date on KONTRONIK homepage.
8.
EG conformity declaration
For all products of the KONTRONIK Motor family
we confirm that the electromagnetic compatibility
directives 89/336/EWG, 91/263/EWG and
92/31/EWG are met.
The following fundamental standards were used:
EN 61000-6-1
Rottenburg,
By the act of using this motor the user accepts all
Repairs can be obtained through your distributor or
if you are located in Europe, directly by
Deliveries freight forward cannot be
Please obey: To handle a replacement a valid
credit card number with security code is necessary.
In case of an irreparable damage the product will
be returned to you only on your request and at your
may not been thrown out with
household rubbish. They should be
disposed of
mentally safe after their
ice life. The national and local refuse disposal
regulations must be observed.
Service, Technical Support, Hotline
(+49(0)800 278745377)
free when calling from Germany
Latest KONTRONIK product information, FAQ,
and telephone reachability can be found up
-to-
date on KONTRONIK homepage.
EG conformity declaration
For all products of the KONTRONIK Motor family
we confirm that the electromagnetic compatibility
directives 89/336/EWG, 91/263/EWG and
The following fundamental standards were used:
KONTRONIK GmbH
To Next Page
Loading...