How to troubleshoot a Konwin Heater that will not operate?
If your Konwin Heater isn't operating, start by ensuring the power cord is securely plugged into a working electrical outlet. Also, verify that the heater is placed on a flat, solid surface and that the power switch is in the ON position.
Why does my Konwin KPT-5167L Heater keep turning on and off?
It's perfectly normal for your Konwin Heater to cycle ON and OFF. This is how it maintains the temperature you've set.
What to do if Konwin KPT-5167L is not blowing hot air?
If your Konwin Heater is not blowing hot air, try increasing the set temperature. This should engage the heating elements.
What happens if my Konwin KPT-5167L tips over?
The Konwin Heater is equipped with a tip-over switch. If it tips over abnormally during use, the power will automatically cut off.
Heater has a shut-off safety feature that activates when tipped over.
Heater automatically shuts off if internal components overheat.
Explains the function of each control button and the LED display.
Describes the LED display for temperature and how to adjust it via remote.
Details the functions of each button on the remote control.
Guide on how to turn on the heater and select fan, low, or high heat modes.
Instructions on how to set the desired temperature using the remote control.
How to set the timer to automatically turn off the heater after a set time.
How to turn the oscillation feature on and off.
Instructions for cleaning the heater shell and keeping it clean.
Guidance on storing the heater in a cool, dry location when not in use.
Provides steps to check if the heater is not operating correctly.
Details the 1-year limited warranty against defects in materials and workmanship.
Information on how to contact Konwin for support and warranty claims.
To Next Page
General
