9
High
Low Med
+
-
The rmo stat
4.
1. Place the product on a rm, level surface.
2. Plug the unit directly into a 120-
VAC electrical outlet.
3. Rotate the POWER KNOB clockwise to select
between low heat, medium heat, and high heat .
To maintain energy, the heater operates at 600 W on LOW
position, at 900 W on MEDIUM position, and at a maximum
of 1,500 W on HIGH position.
Turn the THERMOSTAT KNOB clockwise to the highest
setting.
5. When the room reaches a comfortable temperature,
slowly turn the THERMOSTAT KNOB counterclockwise
until the heating element clicks OFF.
6. This is the point where the thermostat setting equals the
room temperature. At this setting, the thermostat will
automatically turn the heater ON and OFF to maintain the
selected temperature.
7. Turn the POWER KNOB to the OFF position and unplug
the heater when finished using.
odour
To Next Page
