3.MAINTENANCE OF THE FREEZER
CLEANING
- Dusts behind the freezer and on the ground should be regularly cleaned to improve the
cooling effect and help with energy saving.
- The interior of the unit should be cleaned regularly to avoid odor. Soft towels or sponge
dipped in water and non-corrosive neutral detergents are recommended for cleaning. Open
the door for natural air drying before pu
ng the power on.
- Do not use hard brushes, clean steel balls, abrasives, and organic solvents (such as
alcohol, acetone solu
ons, banana oil, etc.), boiling water, acid or alkaline products to
clean your freezer as this may damage the interior and exterior surfaces
- Do not rinse with thoroughly with water (flush) so as not to affect the electrical
insula
on proper es. Use a dry cloth when cleaning temperature control.
DEFROST
LOW FROST FREEZER
- Low frost means that there will be greatly reduced frost in the freezer but it won't stop all the
however, with the removable glass shelves keeping your KTUF196 freezer ice-free is simple.
- Disconnect the plug from the wall socket, open the door and remove all the food and store in
a cool place.
- To remove the frost, use a plas
scraper or let the warm temperature rise naturally un l the
ice has melted. Then wipe away the remaining ice and water. Do not use any mechanical
devices to accelerate the defrost process. Be careful not to damage the refrigerant circuit.
SERVICE INTERUPTION AND MOVING
- In case of power failure foods can be preserved for a few hours even in summer We
recommend to reduce the frequency of door openings and not to add fresh foods.
- Unplug the freezer when le
unused for a long period of or for cleaning. Keep the door
open to avoid developing odors or mold.
- Do not turn the unit upside down or shake it. The carrying inclina
on cannot be greater than
45°.
- When moving the unit
do not hold it by the door or hinge.
- We recommend c
uous opera on once the freezer is installed. Please do not stop the
freezer unnecessarily so as not to affect the unit’s service life.