ONLY USE AN ELECTRICAL EXTENSION CORD IF IT IS IN PERFECT
CONDITION.
NEVER LET THE POWER CORD RUN OVER SHARP EDGES; AVOID
CRUSHING IT.
DO NOT LEAVE THE APPLIANCE EXPOSED TO ATMOSPHERIC
ELEMENTS RAIN, FROST, SUN, ETC..
NEVER USE THE APPLIANCE:
WITH WET OR DAMP HANDS;
IF IT HAS BEEN DROPPED AND HAS OBVIOUS CRACKS OR
MALFUNCTIONS;
IF THE PLUG OR POWER SUPPLY CABLE IS DEFECTIVE;
IN DAMP OR GASSATURATED ENVIRONMENTS.
DO NOT COVER THE APPLIANCE WITH TOWELS, CLOTHING, ETC.
PLACE THE APPLIANCE ONLY ON HORIZONTAL AND STABLE
SURFACES, AWAY FROM SHOWERS, BATHTUBS, SINKS, ETC.
IF THE APPLIANCE GETS WET OR COMES INTO CONTACT WITH
WATER, DO NOT USE IT AND HAVE IT CHECKED BY A SPECIALISED
LABORATORY.
ALWAYS REMOVE THE PLUG FROM THE POWER SUPPLY
IMMEDIATELY AFTER USE AND BEFORE CARRYING OUT ANY
CLEANING OR MAINTENANCE WORK.
IF THE POWER CORD IS DAMAGED, IT MUST BE REPLACED BY
THE MANUFACTURER OR BY ITS TECHNICAL ASSISTANCE SERVICE
OR IN ANY CASE BY A PERSON WITH SIMILAR QUALIFICATIONS, IN
IN ORDER TO PREVENT ANY RISK.
ANY REPAIRING OPERATION MUST ONLY BE CARRIED OUT BY A
SPECIALISED TECHNICIAN. REPAIRING THE APPLIANCE YOURSELF
To Next Page
Loading...
