MANTEINANCE
MANTEINANCE
1. As an additional precaution, we recommend to use pliers to open and close the safety catches
on the front grille.
2. Use the appliance in dry places with a low humidity level.
3. Keep the fan clean. Wipe with a dry cloth.
4. Do not use corrosive cleaners.
5. Clean and cover the fan before storing it.
NB: READ THE INSTRUCTION MANUAL BEFORE THE USE.
LIST OF PARTS
1. safety grid
2. fan propeller
3. oscillating part
4. motor
5. switch housing
6. switch buttons
7. fixing screw of the switch housing
8. inside rod
9. outside rod
10. base cover
11. height adjusting knob
PRECAUTIONS
1. Before plugging the appliance, verify that the electric
system corresponds to the requirements indicated in the instructions.
ASSEMBLY
1. Remove the 4 bolts from the pedestal fan rods; insert the
pedestal fan rods by taking care to align the through holes on
the rods with the screw slots. Reinsert the bolts and tighten
them. Insert the terminals at the ends of the rods.
2. Insert and tighten the rod by retaining the bolt. Caution: never
remove the nut inside the rod.
1
3
4
2
6
5
7
8
9
11
10
To Next Page
Loading...
