15
AVAILABLE FUNCTIONS
The app can synchronize motion status, such as step counter, sleep
monitor, heart rate monitor, blood pressure, etc.
• Start page: Display time, date and charging status
• Smart Alarm Clock: Set the clock in the app and the device will vibrate
at the indicated time
• Pedometer: Count your steps in one day, automatically resets after 24
hours. You can view step history in the app.
• Calories: Count calorie consumption, counter automatically resets after
24 hours. You can view your calorie history in the app.
• Distance: Count the miles traveled, resets automatically after 24 hours.
You can view step history in the app.
• Heart rate monitor: Switch to the Cardiac frequency monitor interface,
the test will start automatically and the dates will be saved in the app.
• Blood Pressure Monitor: Switch to the Blood pressure monitor interface,
the test will start automatically and the dates will be saved in the app.
• Sleep Monitor: Open the sleep detection function in Band, detects your
sleep status over 24 hours. Save the dates in the app.
of the right hand while, with the thumb of the same hand, gently pushing
down the silicone bracelet on the side opposite the sensor (white dot).
2) Connect the device to a USB socket on a PC and leave charging for at
least 4 hours.
3) Once the charging is complete, reassemble the device by performing the
same steps in the reverse order.
4) In order to use your device, you must download the app from the afore-
mentioned stores.
5) To connect your device and application, open your phone settings and
activate connections with wireless devices.
6) Open the application; select the “Notification Center” menu, “connection
management”, enable device search, select the relevant device.
7) Allow application notifications.
8) Follow the setup wizard steps.
9) After connecting the bracelet correctly, the time and date will be synchro-
nized. It is advisable for convenience to configure alerts and set all alarms on
the device directly from the app.
To Next Page
Loading...