Caution: only use this mode when the water tank is provided with
fresh cold water.
Turn the lock lever of the tank to a horizontal position and carefully
pull the water tank out of the appliance to fili it. Fili the water tank
with fresh cold water and make sure that the water level in the
water tank does not exceed the maximum level {MAX).
lf you piace a frozen cooling element in the water tank, make sure the water level does not exceed
the maximum level.
Piace the water tank back in the originai position and turn the lock lever to the vertical position.
• Switch on the appliance using the ON/OFF key.
• Press the model cool.
• Change the ventilation speed with each press on the button SPEED: low, medium or high.
Extra instructions
• Always use fresh cold water.
• Make sure the water in the water tank does not come below the minimum level {MIN) when using
the cooling.
SWING MOOE
By means of the swing mode you can determine the back and forth movements of the fins far a better
air displacement.
Switch on the appliance at the required mode.
Press the swing key and the fins move to the left and right continuously.
The up and down wind direction can be adjusted manually..
CLEANING AND MAINTENANCE
Before cleaning the air cooler, you must switch it o by means of the on/o button and remove the
plug from the socket.
Cleaning the exterior
Clean the exterior of the appliance with a damp cloth or sponge. lf necessary, you can clean the
exterior of the appliance
by means of a mild washing-up liquid.
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Dry the exterior of the appliance.
• Never submerge the appliance, card or plug in water or any other liquid.
Cleaning the air filter
In arder to allow the air cooler to function as well as possible, we recommend cleaning the air filter
regularly. The air filter could get clogged with dust and dirt.
To Next Page
Loading...