Unscrew the air filter at the rear of the appliance and remove it from the appliance.
Clean the air ftlter with a mild detergent in lukewarm water (approx. 40°C). Then properly rinse clean
the air ftlter with clean water and allow it to dry in the air. Do net piace the air ftlter in the sun or on the
heating to dry it. Piace the air ftlter back in the appliance. Check that it is fully dry, before using the air
cooler again.
Cleaning the ventilation grilles
In order to allow the air cooler to function as well as possible, you can clean the ventilation grilles by
means of a vacuum cleaner with a soft brush nozzle.
Cleaning the water absorbing filter
When you have removed the air ftlter, you can also remove the water absorbing ftlter. Remove the
water absorbing ftlter from the holder, clean it with clean water and a soft brush and then carefully
piace it back in the holder. Do not use detergents, as they can aect the water absorbing ftlter.
Cleaning the water tank
1. Remove the water tank from the appliance and carefully disconnect the pump from the water tank.
2. Throw away any water tank and clean the tank a soft detergent and warm water. Properly rinse
with clean water and dry.
3. Fasten the pump in the holder again and place the water tank back in the appliance.
To Next Page
Loading...