REMOVE THE PLUG FROM THE SOCKET.
FULLY UNWIND THE POWER CABLE BEFORE STARTING UP THE
APPLIANCE.
USE AN ELECTRIC EXTENSION CORD ONLY IF IN PERFECT
CONDITION.
NEVER LET THE POWER CORD RUN ON SHARP EDGES; AVOID
CRUSHING IT.
DO NOT LEAVE THE APPLIANCE EXPOSED TO THE ELEMENTS
RAIN, FROST, SUN, ETC..
NEVER USE THE APPLIANCE:
WITH WET OR DAMP HANDS.
IF IT HAS FALLEN AND HAS OBVIOUS CRACKS OR APPEARS TO
MALFUNCTION.
IF THE PLUG OR POWER CORD IS DEFECTIVE.
IN DAMP OR GASSATURATED ENVIRONMENTS.
DO NOT COVER THE APPLIANCE WITH TOWELS, CLOTHING, ETC.
PLACE THE APPLIANCE ONLY ON HORIZONTAL, FLAT AND
STABLE SURFACES, AWAY FROM SHOWERS, BATHTUBS, SINKS,
ETC.
DO NOT ALLOW WATER OR OTHER LIQUIDS TO THE APPLIANCE
IN ORDER TO AVOID ELECTRIC SHOCK.
IF THE APPLIANCE GETS WET OR COMES INTO CONTACT WITH
WATER, DO NOT USE IT AND MAKE IT CHECK BY A TECHNICIAN.
ALWAYS REMOVE THE PLUG FROM THE MAINS SUPPLY
IMMEDIATELY AFTER USE AND BEFORE CARRYING OUT ANY
CLEANING OR MAINTENANCE WORK.
TO TURN OFF THE APPLIANCE, BRING THE TIMER VALUE TO THE
To Next Page
Loading...