Refit the mesh and clip in place securely.
• Never spray with liquids or submerge the unit in water or any other liquid.
• Do not use flammable liquids, chemicals, abrasive creams, steel wool or scouring pads for
cleaning.
• It is recommended to clean periodically the elements in contact with water with anti-scaling and
decalcifying agent.
Caution! Empty the water tank and clean it every three days.
• Please note that high humidity levels can encourage the development of biological life forms in the
environment.
• Make sure that the area nearby the appliance does not become wet or damp. In this case, switch
o and disconnect the unit from the power supply. If you cannot adjust the intensity of the
appliance, use it alternatively. Do not allow absorbent materials such as upholstery, curtains, drapes,
tablecloths or similar fabrics to become damp.
• Unplug the appliance from the power supply during cleaning and maintenance procedures
• Do not leave residual water in the tank when the product is not in use
• Always empty the appliance before storing it. Always clean the product before next use
• It is recommended to clean periodically the elements in contact with water with anti-scaling and
decalcifying agent.
STORAGE
• Switch o and unplug the unit.
• Ensure all water is removed and the appliance. Allow the unit to run for 1 – 2 hours without water so
as to dry it quicker. More time may be required depending on how humid the ambient air is.
• Coil the power cord loosely and place next to the unit.
• Remove the Batteries from the Remote Control.
• When the appliance it totally dry, store in a dry well-ventilated area.
READ AND SAVE THESE INSTRUCTIONS
To Next Page
Loading...
