11 12
10.1
10. REMOVE HARNESS BUCKLE
10.2
D
D
These instructions use the following symbols:
The 946 CRS is exclusively intended to secure your child in your vehicle.
The child safety seat has been designed, tested and approved according to the
requirements of the European Standard for Child Safety Equipment (ECE R44/04). The
seal of approval "E" (in a circle) and the approval number are located on the orange
approval label (sticker on the child safety seat).
*ECE=European Standard for Child Safety Equipment
DANGER! This certication will be invalidated if you make any
modications to the child safety seat. Only the manufacturer
is permitted to make modications to the child safety seat.
Unauthorised technical changes can cause the protective
function of the seat to be reduced or completely eliminated.
APPROVAL
Symbol Keyword
DANGER!
WARNING!
CAUTION!
TIP!
Explanation
RISK of severe personal injury
RISK of minor personal injury
RISK of material damage
Useful notes
Tested and approved according to ECE R44/04
Body Weight
0+(0-13kg)
0+I(0-18kg)
I(9-18kg)
II III(15-36kg)
Belt
Facing backwards
Facing forwards
ISOFIX+Top Tether
Belt
Belt
Belt + ISOFIX
Belt + ISOFIX
Belt + ISOFIX
+Top Tether
Installation method Installation direction
9.2
CLICK
To Next Page
Loading...