13 14
DANGER! Use the 946 CRS exclusively for securing your child in your vehicle. It is
in no way suitable for using as a seat or toy in the home.
USE IN THE VEHICLE
Please observe the instructions for using Child Restraint Systems （CRS） in the vehicle
handbook. During use, be sure to observe any restrictions relating to airbags.
Please refer to the vehicle handbook information about vehicle seats which are certied
for the use of children's restraining systems according to ECE R16.
1. Facing backwards (against the direction of travel) 0-18kg: Do not use on passenger
seats with an active front airbag!
2. Facing forwards (in the direction of travel) 9-36kg: If there is a passenger airbag:
Slide the passenger seat well backwards and follow
(Please observe the applicable regulations in force in your country)
Do not make any technical changes to the child safety seat.
Vehicle belt—Diagonal Belt
Vehicle belt—Lap Belt
ISOFIX Fastening Points
Correct/Proper
Wrong/Improper
.When using as Universal category (Group 0+ I II III),
This child restraint system is suitable for models equipped with a 3-point
vehicle belt that complies with ECE R16 and does not apply to models
only equipped with 2-point seat belts.
.When using as Semi-Universal category (Group 0+I II III),
This child restraint system is suitable for models equipped with the
3-point vehicle belt that has passed the ECE R16 requirement and is not
suitable for models only equipped with 2-point seat belts. And only after
installed ISOFIX, then can use on it.
1.2
Press the ISOFIX buttons (23) to push out the two ISOFIX locking arms
(22) from the seat base.
1. ISOFIX
Do not use facing forwards before the child’s weight exceeds 9kg (refer to
instruction).
WARNING!
1.3
Push back the child safety seat until the child safety seat is rest rmly
against the vehicle seat then you hear a clicking sound which indicates
they are fully engaged. And on both sides of the ISOFIX indicator from
red to green safety color.
1.1
If your vehicle is not tted with ISOFIX insertion aids as standard, clamp
the two ISOFIX insertion aids (1), which are included in the scope of
delivery of the seat , with the opening pointing upwards, to the two
ISOFIX fastening points (2) of your vehicle. If you don't have ISOFIX
insertion aids (1) , please ignore this step.
1.4
Move the child safety seat backwards and push the backrest against the
vehicle seat.
2. ROTATION
TIP! The ISOFIX fastening points are located between the surface and
the backrest of the vehicle seat.
TIP! Release button towards each other to loosen the ISOFIX fastening
point on both sides. Move the ISOFIX locking arms back into the seat base
,
it can protect ISOFIX.
any relevant directions in your vehicle handbook, please ensure that the airbag is
deactivated.
①
②
To Next Page
Loading...