6
Delete Pairing
To delete all the pairings, press and hold the
"Music and Light Mode" Button until the chosen
chime rings twice, usually for 8-12 seconds.
Note: You can choose the chime before or after
pairing.
1. Press "Music and Light Mode" Button to select
your favored Notification Modes (Sound and LED
Flash/ Sound/ LED Flash/ Sound and LED
Constant)
2. Once plugged in an outlet with power, the
receiver works with Sound and LED Flash.
3. DO REMEMBER the LED Flash Mode is
available when you don't want to be disturbed.
Once the Volume and Music are selected, the
doorbell will work in this mode next time and you
don't need to worry about re-set.
Notification Modes
Memory Function
To Next Page
Loading...