VOORUI
The power supply voltage range of equipment operation is indicated on the
label of the back shell. If the supplied voltage cannot be determined, consult
the local power company.
When the monitor is not used for a long time, please cut off the power supply
to prevent the damage of the motor and abnormal power supply voltage in
thunderstorm days.
Do not overload the socket, which may cause fire and electric shock.
Please do not put foreign bodies into the machine, which may cause short
circuit or cause fire and electric shock.
Please do not disassemble or repair this product by yourself. If there is any
fault, please contact the after-sales service personnel directly.
Please do not pull or twist the power cord excessively.
Securing the Installation Space
1.3
Make sure to have enough space for ventilation when placing the product.
An internal temperature rise may cause fire and damage the product.
Maintain enough space around the product as shown in the diagram when
installing the product.
1 Ocm
1 Ocm
1 Ocm 1 Ocm
1 Ocm
Protection Recommendations:
1.4
Suggestions for eyes
In order to avoid eye fatigue and pain in neck, arms, back and shoulders caused
by long-term use of the monitor, please pay attention to the following points:
O
Place the monitor 20-28 inches away from both eyes (about 50-70cm).
O
Use the monitor to keep the eyes moist or increase the blinking frequency.
O
After using the monitor for 2 hours, please rest for 20 minutes.
02
To Next Page
Loading...
