7. Please form the habit of frequent charging to keep the battery sufficiently charged.
8. Please fully charge the battery once monthly if it is not used for a long time.
9. Please charge the battery at a cool and ventilated place away from high temperature or
humidity with supporting charger. Keep the charger away from water to avoid electric shock.
10. Make sure to keep the charging socket away from water to avoid short circuit. Do not
wash the motor with water to prevent fault of the skateboard.
V. Basic Parameters of Electric Skateboard
Photo
Body
N.W. 8KG
Dimension 920*253.5*126MM
Battery life 20KM
Maximum
climbing ability
25°
Maximum load
capacity
130KG
Temperature
range
0℃-40℃
Surface Material
7 layers of maple veneer + 1 layer
of glass fiber (optional)
Battery
Battery capacity 36V--4.3Ah
Type
20 18650 high rate lithium
batteries
Weight 1.7KG
Charging time 2H
Wheel
Material PU
Size 90*52MM
Hardness 85A (optional)
Remote
control
Type 2.4 digital remote control
Battery capacity 300MAH
Type of battery Special lithium battery
Charging time 30 minutes
Charger
Input AC110V—240V
Output DC42V2A
Charging time 2H (high-current output 2000MA)
Temperature
range
0℃-40℃
Model AOI-08420200DD1
VI. Working Principle
The skateboard is driven by two-wheel high speed motors, directed by Power Bridge, and
powered by high rate battery pack. Upgraded sine wave is adopted for the control system for
realizing more stable power system.
VII. Accessories
1. Helmet
Head is the most important part of human, so it is very important to protect head during the
To Next Page
Loading...