Korenix JetI/O 6510 User Manual

Korenix JetI/O 6510
Industrial Intelligent Ethernet I/O Server
User Manual
Sept. 2009 (V1.5)
www.korenix.com

Korenix JetI/O 6510 Specifications

General

Brand	Korenix
Model	JetI/O 6510
Category	Server
Language	English

Summary

Introduction to Korenix Jetl/O 6500 Series

Overview of Jetl/O 6500 Series

Jetl/O 6510 Product Specifications

Details the technical specifications of the Jetl/O 6510, including system, network, and environmental aspects.

Hardware Installation Guide

Hardware Introduction and Indicators

Wiring Power Input

Provides step-by-step instructions for correctly wiring the DC power input to the Jetl/O unit.

Wiring I/O Connectors

Details the pin assignments and connections for the analog input I/O connectors.

Preparation for Device Management

Remote Management Preparation

Guides users on how to prepare for and access the Jetl/O server remotely via the network.

Feature Configuration Options

Block I/O Configuration Utility Installation

Introduces the primary software utility for configuring Jetl/O modules, including installation.

Block I/O OPC Server Utility

Firmware Upgrade Procedures

Configuration Management

Backup, Restore, and Reset Operations

Modbus/TCP Command Set

Introduction to Modbus/TCP Protocol

Jetl/O 6510 Modbus/TCP Address Mapping

Details the Modbus/TCP register map and address assignments for the Jetl/O 6510.