Korg EMX1 - Test Mode Procedures; Test Mode Operation and Navigation

EMX-1 Test Mode
How to start and operate the test mode:
ERASE + PATTERN & POWER ON: Internal test,
ERASE + STEP EDIT & POWER ON: Adjustment of valve circuit, L/R balance
calibration, Tube gain balance measurement
SHIFT + DRUM PART 1 & POWER ON: Internal skip
SHIFT + DRUM PART 3 & POWER ON: Audio test
16: Proceed the test
SHIFT + 15: Re-executing the test
: ITEM UP
: ITEM DOWN
>> : STEP UP
<< : STEP DOWN
NOTE:
To proceed the SmartMedia test, it is required to prepare a SmartMedia whose capacity
is more than 16MB.