Notice
-Connect a USB flash memory (USB2.0) to the USB A connector.
-Connect a personal computer which is working on USB2.0 to the USB B connector.
-When internal check [ Please Connect Digital Cable] is displayed, connect the OPTICAL IN and OUT using
a OPTICAL cable (loop).
-Confirm that the numer of keys wich is connected is same as in the diplay.
When the different number of the keys is displayed, the PCB of the keyboard is different KLM-2860.
-In the operation check, the caliblation is needed for RIBBON, JOYSTICK, PAD, AFTERTOUCH..
-When to set the preload data of M3-88 to factory setting, connection of KEYBED is needed.
To Next Page
Loading...
