Korg nanoPad2 User Manual

Explains how to prepare for using the nanoPAD2 by downloading and installing the KORG KONTROL Editor software.

Describes how the gate arpeggiator applies to trigger pads when Touch Scale mode is off, detailing X-axis velocity and Y-axis gate speed.

Explains gate arpeggiator behavior in Touch Scale mode, focusing on X-axis note number and Y-axis gate time.

Details how note range, key, and octave shift settings affect the playable note range within the Touch Scale mode.

Defines parameters for trigger pads, including MIDI channel, assign type, pad behavior, note number, and control change assignments.

Covers global settings like MIDI channel, velocity curves, BPM, and MIDI clock synchronization for the entire device.

Details X-Y pad settings for control change or pitch bend messages, including MIDI channel, polarity, and touch/release behavior.

Explains Touch Scale mode operation, including X-axis note messages, Y-axis control changes, polarity, gate speed, and note velocity.

Describes how to set up custom scales for the Touch Scale feature, including parameter definitions and an example of a major pentatonic scale.

Provides a comprehensive list of available scale names and their corresponding note configurations, with Key C as a reference.