EasyManua.ls Logo

Korg M3 - IMPORTANT SAFETY INSTRUCTIONS

Korg M3
2 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
About the Owner's Manual
2
©
2008 KORG INC.
E 1
2009 GH
8. Turn the power off. Then turn the power on again,
and verify that the opening screen indicates version
V2.0 or later.
Note: If the message “File/path not found” appears when
you execute the command, execute the command once
again.
9. When the opening screen has disappeared, begin the
second update.
Perform the update as described in steps 3–8 above.
When you turn on the power again in step 8, the opening
screen will show the XPanded logo.
If the USB storage device is connected, the EX-USB-
PCM03 will be auto-loaded from the USB storage device
after the system has loaded.
Note: Never disconnect the USB storage device
containing the KEP file while the EX-USB-PCM data is
being loaded.
This completes the upgrade.
Turn off the power to finish the procedure.
*If you have any questions, please contact your local Korg dis-
tributor.
About the Owner's Manual
The downloaded files will also contain a “Manuals”
folder. Please refer to the PDF manuals in this folder for
more information about the new features in this M3
XPanded upgrade.
You can read these documents using any computer
with a PDF reader (such as Adobe Acrobat), and print
them if you wish.
For information on what’s new, please see
M3XP_SupplG_E.pdf.
Data handling
Improper use or malfunction may cause the contents of
the memory to be lost, so we recommend that you save
important data on a backup CD or other media. Please be
aware that Korg will accept no responsibility for any
damages which may result from loss of data.

Other manuals for Korg M3

Related product manuals