Korg monotribe Firmware Update Instructions

monotribe System Firmware Update Instructions
1
System Firmware Update Instructions
Do not playback the system update file on any speaker or head phone system as this could le ad to
damage to equipment and/or hearing loss. Korg or any of its affiliates will n ot accept responsibility for
any damages, personal loss or injury that may result from playback of the file.
What you will need
You will need the following to perform your update.
 An audio player or personal computer capable of audio playback
 A stereo mini-jack audio cable
 AC adapter KA-350 or six AA batteries
Make sure the batteries are brand new if using alkaline or fully charged if using NiMH batteries.
monotribe will not enter update mode if the batteries are depleted.
Preparations
1. Unzip the file “monotribe_updater_0211.zip”.
If using an audio player, transfer the file MONOTRIBE_SYS_0211.wav from your computer to your
audio player.
Do not playback the system update file on any speaker or headphone system as this could lead
to damage to equipment and/or hearing loss.
2. Check the current version
Turn the power on while pressing the PLAY and GATE buttons.

Korg monotribe Specifications

General

Type	Analog Ribbon Station
Additional Oscillator	No
Additional Filter	No
Oscillator	1 VCO with Sawtooth, Triangle, and Square waveforms
LFO	1 LFO (Triangle, Square)
Sequencer	8-step sequencer
Drum Sounds	Kick, Snare, Hi-Hat
Inputs	Sync In
Outputs	Headphone Out
Power	6 AA Batteries or DC 9V
Power Supply	Optional AC adapter