monotribe System Firmware Update Instructions
2
System version 1.x
If the current system is ve rsion 1.x, the LEDs will
be lit as sh own (with F LUX LED bli nking). Your
monotribe is not up to date. Proceed to step 3.
System version 2.0ｘ
If the current system is version 2.0x, the LEDs will
be lit as sh own (with F LUX LED bli nking). Your
monotribe is not up to date. Proceed to step 3.
System version 2.1x
If the current system is version 2.1x, the LEDs will
be lit as sh own (with F LUX LED bli nking). Your
monotribe is already up to date.
Some STEP LEDs 5-8 may light up while displaying the system version.
3. Connect the audio output of your playback device to the SYNC IN connector on your monotribe.
Make sure to connect to SYNC IN and not AUDIO IN.
To Next Page
Loading...
