Korg Nu:Tekt NTS-2 User Manual

1
Table of Contents
Introduction .............................................................................2
Main features of this unit ......................................................... 2
Part names and functions ........................................................2
Making connections and turning on the power ......................2
Turning the power on/o ...................................................2
Auto power-o function ....................................................2
Four operating modes .............................................................2
Oscilloscope mode (SCOPE) ..............................................................................................2
Function generator mode (WAVE) ..................................................................................2
Spectrum analyzer mode (FFT) ........................................................................................ 2
Tuner mode (TUNER) ..........................................................................................................2
Basic operations ....................................................................... 3
Oscilloscope mode (SCOPE) .....................................................3
Explanations of each parameter ........................................3
Function generator mode (WAVE) ...........................................3
Button 1 (button 3): explanations of each parameter ........ 3
Button 2 (button 4): explanations of each parameter .......3
CATEGORY = Oscillator .......................................................................................................3
CATEGORY = LFO .................................................................................................................3
CATEGORY = Noise ..............................................................................................................3
CATEGORY = Pulse ..............................................................................................................3
CATEGORY = Envelope .......................................................................................................3
Spectrum analyzer mode (FFT) ................................................ 3
Explanations of each parameter ........................................3
Tuner mode (TUNER) ................................................................4
Explanations of each parameter ........................................4
Global mode .............................................................................4
1: Input ....................................................................................................................................4
2 : SETTINGS ..........................................................................................................................4
3 : SETTINGS ..........................................................................................................................4
Specications ...........................................................................4
Published 06/2022© 2022 KORG INC. www.korg.com
E 1
NTS-2 oscilloscope kit
MULTIFUNCTIONAL UTILITY KIT
Owner’s Manual
* All product names and company names are the trademarks or registered trademarks
of their respective owners.

Korg Nu:Tekt NTS-2 Specifications

General

Input Impedance	1 MΩ
Sampling Rate	48kHz
Input Coupling	DC
Channels	2
Power Supply	USB bus power
Weight	130 g
Bandwidth	20kHz
Type	Oscilloscope

Summary

Making connections and turning on the power

Turning the power on/off

Instructions for powering the Nu:Tekt NTS-2 oscilloscope kit unit on and off using the power button.

Auto power-off function

Details on the automatic power-off feature that conserves battery life by turning the unit off after a period of inactivity.

Oscilloscope mode (SCOPE)

Function generator mode (WAVE)

Button 1 (button 3): explanations of each parameter

Button 2 (button 4): explanations of each parameter

Spectrum analyzer mode (FFT)

Tuner mode (TUNER)

Explanations of each parameter

Detailed explanation of parameters for Tuner mode, covering display, input, calibration, and scope view.