Korg Pa50 Connecting Manual

CONNECTING THE KORG PA SERIES TO AN EXTERNAL
SEQUENCER (MIDIWORKS)
You can program a new Song on an external sequencer, using Korg PA as a multi-timbral
expander.
Connections and settings via MIDI Interface
In order to connect the Korg PA to a computer, you need to have a computer with the MIDI
interface.
1. Connect the Pa80 and the computer as in the following diagram.
2. Go to “MIDI Setup” . Select the External Sequencer Setup.
PA3X, PA2X
PA3X musikant,
PA800, PA500
Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Sequencer Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA900, PA600 Select the “Extern.Seq.” MIDI Preset. You can do this by going to the
“MIDI: General Controls” page of the Global mode.
PA1X Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Global Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA80, PA50 Press GLOBAL, and go to “Page 5 - MIDI Setup” . Select the Ext.Seq
Setup.

Korg Pa50 Specifications

General

Type	Arranger Keyboard
Polyphony	62 voices
User Styles	48
MIDI	In, Out, Thru
Keyboard	61 keys
Timbres	16
ROM	32 MB
Performances	160
Effects	4 stereo digital multi-effect systems
Sequencer	16-track
Song Play	Yes
Display	Backlit LCD
Outputs	L/Mono, R, headphones
Inputs	Damper Pedal, Assignable Pedal/Switch
Floppy Disk	3.5"
Storage	Internal and floppy disk
Connections	Sustain pedal, assignable pedal
Amplification	2 x 15 Watts
Speakers	2 x 10 cm
Sound Engine	HI (Hyper Integrated) Synthesis System