[2]Firewire firmware update
[2.1:Equipments and tool]
1 WindowsXP computer (HomeEdition or ProfessionalEdition) with Firewire terminal
2 Firewire cable
3 BridgeCo 1394 DownLoad Tool (software)
4 KORG DM1500 Updater (software)
[2.2:Preparation (Install of the software) ]
1 Double click the BridgeCo 1394 DownLoad Tool ("setup_bcodl_tools_2_30_0.exe") and do the install.
1_1 " New hardware device detected" is displayed, select "No, this time not connect".
1_2 Dialog of "not passed the compatibility to Windows logo test" is displayed, click the "continue".
2 Double click the KORG DM1500 Updater("DM1500UpdDaterSetup[e].exe"), and do the install.
Do the install until the dialog of the install completed is displayed.
[2.3:Firewire firmware update]
1 Start the DM1500 Updater (Fig7).
2 Connect the WindowsPC and ZERO4/8 by a Firewire cable.
* This time for the written GUID," New hardware device detected" is displayed then click "cancel".
(Fig8_1)
Also DM1500 Updater clears the GUID, click the "Clear GUID" button.
After GUID cleared, the display becomes "Fig8_3", then turn the power off of ZER4/8. And turn the power on again.
3 The DM1500 Updater detects ZERO4/8, display becomes "Fig9".
4 Click the "Update" button, and start the update.(Fig10)
5 Wait for the completion of the update, Fig11 is displayed the update has completed.
Fig5
Fig6
Fig7
Fig8_1
Fig8_2 Fig8_3
To Next Page
Loading...
