H
Heather TaylorSep 23, 2025
What does it mean if my KoRo Kitchen Appliances makes 15 beep sounds?
- RRoy KiddSep 23, 2025
If your KoRo Kitchen Appliance makes 15 beep sounds, it indicates overtime heating of the Mixing chamber, requiring service.
What does it mean if my KoRo Kitchen Appliances makes 15 beep sounds?
If your KoRo Kitchen Appliance makes 15 beep sounds, it indicates overtime heating of the Mixing chamber, requiring service.
What to do if the button is unresponsive on KoRo Kitchen Appliances?
If your KoRo Kitchen Appliance's button is unresponsive, try disconnecting it from power for two minutes before powering it back on. This can help reset the system after a brief power disruption. If the problem continues, it might indicate a display panel button malfunction, requiring service.
What to do if indicator light is on, but KoRo Kitchen Appliances does not function properly?
If the indicator light is on but your KoRo Kitchen Appliance isn't working, make sure you've selected a function program. Also, check that the water reservoir is filled to the correct level and properly positioned. If these steps don't resolve the issue, the temperature sensor or water level electrode may be malfunctioning, requiring professional service.
Why are ingredients not completely broken down in KoRo Kitchen Appliances?
If your KoRo Kitchen Appliance ingredients are not completely broken down, ensure you are adding ingredients according to the recipe in the instruction manual. Also, verify that you have selected the correct program function for your intended use. If the issue persists, the machine may have a failure requiring service.
What to do if there is an overflow in KoRo Kitchen Appliances?
If your KoRo Kitchen Appliance is overflowing, ensure that you have selected the correct program function. Also, make sure you are not adding too many or too large ingredients; follow the recipe in the instruction manual. If the issue continues, there may be a machine failure requiring service.
What does it mean if my KoRo Kitchen Appliances makes 8 beep sounds?
If your KoRo Kitchen Appliance makes 8 beep sounds, it indicates an abnormal internal communication interface, requiring service.
What does it mean if my KoRo Kitchen Appliances makes 6 beep sounds?
If your KoRo Kitchen Appliance makes 6 beep sounds, clean the electrode or reduce the amount of material. This indicates that the upper water level electrode sticks or there is too much material.
What does it mean if my KoRo Kitchen Appliances makes 7 beep sounds?
If your KoRo Kitchen Appliance makes 7 beep sounds, check whether the voltage is lower than 160V or higher than 260V and use stabilized power supply. This indicates an abnormal voltage signal.
Why is heat continuously applied without pause in KoRo Kitchen Appliances?
If heat is continuously applied without pause in your KoRo Kitchen Appliance, it indicates a temperature sensor abnormality, requiring service.
What to do if the grinding chamber does not intake water in KoRo Kitchen Appliances?
If the grinding chamber of your KoRo Kitchen Appliance does not intake water, it could be due to a water pump abnormality, requiring service. Alternatively, the water reservoir filter might be blocked. To resolve this, unscrew the filter counterclockwise from the bottom of the water tank, clean it, and then tighten it clockwise.
Add ingredients and water, check water level, and secure covers.
Select desired function using the menu button.
Choose desired capacity from available options.
Initiate the operation or cancel/reselect.
Initiate automatic cleaning and hot drying process.
General advice and checks required before appliance operation.
Add ingredients and water, check water level, and secure covers.
Select desired function using the menu button.
Select the desired capacity for the operation.
Set a timer for delayed start of the drink preparation.
Begin the operation or cancel and reselect.
Initiate automatic cleaning and hot drying.
Instructions for cleaning the mixing chamber.
Guide for cleaning removable accessory parts.