20
Operation
The temperature of accessible surfaces may be high
during operation. Therefore, do not touch the appliance
during and/or immediately after operation.
Tip: Prepare the waffle batter in advance before
switching on the appliance.
1. Connect the appliance to a properly installed wall socket.
2. The green indicator light (2) lights up and the heating
process starts.
up.
3. As soon as the necessary temperature is reached the
light (2) lights up as well. Your bubble waffle maker is
now ready for operation.
Note: During operation, an integrated thermostat switches
the appliance on and off to ensure a constant temperature.
This is indicated by the red indicator light (2) cycling on and
off.
4. Pull the release button (4) and open the lid (1) by the
handle (3).
5. Fill in the batter into each individual bubble of the lower
plate.
6.Close the lid (1) carefully.
Tip: To guarantee an even browning process grease both
To Next Page
Loading...
