Need help?Do you have a question about the Kortek KTN-1401 and is the answer not in the manual?
Essential safety guidelines to follow before and during monitor servicing.
Specific warnings and measures to mitigate fire and electrical shock risks.
Precautions related to potential X-ray emissions and high voltage circuits.
Further procedural precautions for component replacement and overall safe servicing practices.
Comprehensive specifications for the KTN-2001 model, including electrical and environmental parameters.
Comprehensive specifications for the KTN-1401 model, including electrical and environmental parameters.
Diagram illustrating the physical layout and component placement on the main PCB.
Layout of the socket PCB and pinout description for the signal cable connector.
Diagram and table detailing signal timing parameters for horizontal and vertical synchronization.
Overview of control PCB components and their functions, aiding in operation.
Step-by-step guide for various adjustment controls, including orientation and warm-up time.
Specific instructions for adjusting display parameters like H-SIZE, V-SIZE, H-POSI, and V-POSI.
High-level block diagram illustrating the main functional sections of the monitor.
Explanation of the overall monitor block diagram and signal flow.
Detailed schematic and explanation of the video drive section's electronic components.
Description of the video output amplifier and bias circuit, including component functions.
Explanation of the Switched-Mode Power Supply (SMPS) circuit and its operational principles.
Details on the horizontal processor circuit, focusing on the TDA2595 IC and its functions.
Explanation of the vertical output circuit, TDA1675 IC, and deflection yoke control.
Description of the horizontal drive and output stages, including FBT and deflection components.
Explanation of the G1 control and brightness adjustment, including blanking and contrast.
Details on the sync control circuit and its role in maintaining output stability.
Procedures for adjusting B+ voltage and screen voltage using specific terminals and conditions.
Methods for adjusting high voltage and contrast by controlling brightness and input voltage.
Steps for adjusting horizontal raster position and performing coordinate value checks.
Guidance on other VR adjustments and high voltage regulation checks for optimal performance.
Flowchart to diagnose and resolve power-related issues in the monitor.
Flowchart to diagnose and resolve issues when the monitor displays no video.
Flowchart to diagnose and resolve problems related to the sync signal.
Flowchart to diagnose and resolve problems concerning the vertical deflection system.
Flowchart to diagnose and resolve problems concerning the horizontal deflection system.
Flowchart to diagnose and resolve issues with the X-ray protection circuit.
Oscilloscope waveforms for power output (FE401) and input signals (Horizontal, Vertical).
Waveforms for horizontal drive (Q605, Q604) and vertical output (IC201).
Oscilloscope waveforms for collector signals (Q702, Q501) and clamp input (IC501).
To Next Page
General