Koukaam NETIO-230A - User Manual

N
N
E
E
T
T
I
I
O
O
-
-
2
2
3
3
0
0
A
A
FW 2.20
U
U
s
s
e
e
r
r
’
’
s
s
M
M
a
a
n
n
u
u
a
a
l
l
V1.01

Summary

Introduction

Features

Details about the device's built-in web server, supported browsers, and functionalities.

Specifications

Technical specifications including input power, max current, latency, and operating temperature.

Minimum System Requirements

Specifies the necessary computer and browser requirements for using the device.

Interface Description

Front View

Description of the front panel components and their functions, including LEDs and buttons.

Back View

Description of the back panel components like power socket, fuse, and output ports.

Installation

Hardware connection of the device

Instructions on how to physically connect the NETIO-230A to the network and power.

Initial Configuration

Operation and Settings

Output control and settings

Guides users on how to control and configure the device's power outputs manually and via schedule.

System configuration

Covers network settings, email, date/time, user management, and firmware updates.

Serial port, Telnet and CGI command control

Details on controlling the device using serial, Telnet, and CGI commands for automation.

Manual control

Explains how to control power outputs directly using buttons on the front panel.

Troubleshooting

Provides solutions for common problems, including resetting to factory defaults and fuse replacement.

Liability

Koukaam NETIO-230A Specifications

General

Number of controlled AC outlets	4
Web interface	Yes
Humidity	10% to 90% non-condensing
Cooling	Passive
Max Load	10A
Connectivity	Ethernet
Control Type	Web
Operating Temperature	0°C to 40°C
Device Category	Power Controller
Protocols	HTTP, SNMP, DHCP, DNS
Output Current	10A per channel
Power	2300W total
Storage Temperature	-20°C to 60°C
Protection	Overload protection
Certifications	CE