Kowa SIX Version II - Advance the Film to the Start Markings; Close the Camera Back; Advance the Film to the First Frame

%The
shutter
button
can
be
pressed
only
after
winding
is
completed.
4. Advance the film to the "start"
markings
Insert the film leader tip into the slit in the take-up spool
Slowly advance the film, making certain that take-up is
smooth. taut. and straight. Continue to advance the film
until the “start” markings on the film (usually arrows) line-
up with the index points (red dots) on the camera s film
guides.
5. Close the camera back
Close the camera back and turn the camera back lock-
ing knob in the direction of the "C" until it comes to a
stop. At the same time. press in, on the camera back
Check to be certain that it is properly locked.
6. Advance the film to the first
frame
Advance the film until the number “1” appears in the
The
from
frame counter window (about six full turns)
the
abvancing further when you reach the first frame
automatic mechanism will stop film
The shutter is now wound and you may take your
picture.